CreatBot PEEK-250
Printago can't control this printer directly. Add it in Fuse as a virtual printer to queue jobs, track material, and keep its job history in Printago while you start each print on the machine. Direct support is planned.
Own one? Help us support it.
- Build volume
- 250 × 250 × 280 mm
- Extruder
- 1
- Nozzles
- 0.4 / 0.6 mm
- Feedstock
- 1.75 mm filament
- Max nozzle
- 480 °C
- Max bed
- 200 °C
- Chamber
- Up to 200 °C
- Connection
- Virtual printer (Fuse)
How to add the CreatBot PEEK-250 as a virtual printer
- 1 Install the Fuse bridge on Windows, macOS, or Docker.
- 2 In Fuse, click Add Printer and search for the PEEK-250. Virtual-only models are listed while Show virtual-only printers is checked, which it is by default.
- 3 Sync the new printer to your Printago account. It shows up on the Printers page with a Virtual badge.
- 4 When Printago assigns it a job, start that print on the PEEK-250 yourself. The virtual printer runs for the estimated print time, or click Finish now when the real print comes off the bed.
Need the bridge? Download Fuse for Windows, macOS, or Docker.
The CreatBot PEEK-250 is a 3D printer with a 250 × 250 × 280 mm build volume and a chamber that reaches 200 °C. Printago can't control the PEEK-250 directly. Direct support is planned. Add it in Fuse as a virtual printer and it runs through Printago like the rest of your farm: jobs queue and route to it, material use is tracked, and every print lands in the job history. You start each print on the machine yourself.
Keep the CreatBot PEEK-250 in your queue and your records
A machine Printago can't control usually ends up on a spreadsheet, outside the queue and the material counts. Add the PEEK-250 in Fuse as a virtual printer instead. Printago routes jobs to it, tracks the material each one uses, and keeps its job history next to the rest of your farm. You start each print on the machine; the virtual printer runs for the estimated print time, or you click Finish now when the part comes off the bed.
Direct support for the PEEK-250 is planned. Until it lands, the virtual printer keeps it in Printago.
Frequently asked questions
Does Printago work with the CreatBot PEEK-250?
Yes, as a virtual printer. Printago can't send prints to the CreatBot PEEK-250 directly, but you can add it in Fuse as a virtual printer. It then takes jobs from your queue, tracks material, and keeps a job history alongside the rest of your farm. You start each print on the machine yourself.
Why can't Printago control the CreatBot PEEK-250 directly?
Printago doesn't have an integration for the CreatBot PEEK-250's control protocol yet, so it can't start, pause, or watch its prints. Direct support is planned. Until it lands, a virtual printer keeps the PEEK-250 in your queue and your records.
What does a virtual printer do in Printago?
It stands in for the PEEK-250. Jobs queue and route to it like any other printer, it runs each job for the estimated print time (or until you click Finish now), and the job's material use and history are recorded. You can set it to run in real time, 2×, 5×, or 10×, or to fast-forward, from the printer's Settings tab.
Can I download the G-code Printago slices for the PEEK-250?
No. Printago slices virtual-printer jobs with a generic profile only to estimate print time and material use. That file isn't made for the PEEK-250, so it can't be downloaded. Prepare and start the real print in the printer's own software.
Other CreatBot printers
CreatBot D1000 Pro HS
CreatBot D1200 Ultra
CreatBot D400 HS
CreatBot D600 Pro 2
CreatBot D600 Pro3 HS dual
CreatBot D600 Pro3 HS single
CreatBot D800 Ultra
CreatBot F430
CreatBot PEEK-300
See the full printer compatibility list, or learn about print farm management software.
Sign up for free today
No credit card required. Connect unlimited printers and get production automation running in minutes.