Bambu Lab AMS Lite
Full Bambu AMS Lite support for the A1 and A1 mini: four-color printing, read and assigned per slot.
- Brand
- Bambu Lab
- Type
- Multi-material system
- Slots
- 4
- Supported on
- 3 printers
The Bambu Lab AMS Lite is the open four-spool multi-material unit for the A1 and A1 mini, and Printago supports it in full. Printago reads each AMS Lite slot, shows the loaded filament and color, and assigns materials per slot so four-color prints route correctly, with the same per-slot tracking and filament remapping it offers on the full AMS.
What Printago does with the AMS Lite
-
Four-color printing. Printago reads all four AMS Lite slots, shows what is loaded, and assigns materials per slot so multi-color prints come out right.
-
RFID reading. Bambu RFID spools are auto-detected with the correct material and color, and you can set materials manually for third-party filament.
-
Filament remapping without re-slicing. Print a sliced job on whichever A-series printer is free: Printago maps each color to the AMS Lite slot the filament is actually loaded in.
Printers that support the AMS Lite
Frequently asked questions
Does Printago support the Bambu Lab AMS Lite?
Yes. Printago reads each AMS Lite slot, shows the loaded filament and color, and assigns materials per slot for four-color prints on the A-series.
Which printers work with the AMS Lite in Printago?
Printago supports the AMS Lite on Bambu Lab A1, Bambu Lab A1 mini, Bambu Lab A2L.
Can I assign materials per slot on the AMS Lite with Printago?
Yes. Printago reads each AMS Lite slot, shows what is loaded, and assigns the right material per slot so multi-color and multi-material prints route correctly.
Do I need a Raspberry Pi or extra hardware to use the AMS Lite?
No. Printago connects over your local network through the Fuse bridge, which runs on your computer or in Docker, with no Raspberry Pi and no extra hardware.
Sign up for free today
No credit card required. Connect unlimited printers and get production automation running in minutes.