Bambu Lab A1
The Bambu Lab A1 is a full-size Cartesian (bed-slinger) FDM printer with a 256 × 256 × 256 mm build volume. It ships fully assembled with automatic bed leveling, a direct-drive all-metal hotend rated to 300 °C, and a textured PEI spring-steel build plate. The A1 is designed for users who want a large build area with minimal setup, and it supports the AMS Lite accessory for up to four-color printing. It is best suited to PLA, PETG, and TPU; the lack of an enclosure limits its usefulness with ABS or ASA.
Pros
- Large 256 mm build volume at an accessible price point
- Full auto-calibration and direct-drive extruder ready out of the box
- AMS Lite compatible for up to four-color prints
- 300 °C all-metal hotend handles PLA, PETG, and TPU without modification
Cons
- No enclosure limits material options; ABS and ASA are not practical
- Bed-slinger kinematics can cause ringing artifacts on tall or fast prints
- Larger footprint than CoreXY designs with the same build volume
Bambu Lab A1 capabilities
What Printago can do with this printer once it's connected.
How to connect the Bambu Lab A1 to Printago
- 1 Enable LAN Mode and Developer Mode in the printer's network settings.
- 2 Note the Access Code shown under the printer's LAN settings.
- 3 Install the Fuse bridge on Windows, macOS, or Docker, then run Auto-Scan to discover the printer.
- 4 Prefer the cloud? Run the Bambu Integration Flow in Printago and sign in (firmware 1.04 or earlier), with no local software required.
Need the bridge? Download Fuse for Windows, macOS, or Docker.
Frequently asked questions
Does Printago work with the Bambu Lab A1?
Yes. Printago manages the Bambu Lab A1 over your local network or through Bambu's cloud, with cloud slicing, automatic job routing, and remote monitoring.
How do I connect the Bambu Lab A1 to Printago?
Enable LAN Mode and Developer Mode in the printer's network settings. Note the Access Code shown under the printer's LAN settings. Install the Fuse bridge on Windows, macOS, or Docker, then run Auto-Scan to discover the printer.
Can I manage multiple A1 printers with Printago?
Yes. Printago is built for production fleets: route jobs across many A1 units, mix them with other brands, and run the whole farm from one dashboard.
Do I need a Raspberry Pi or extra hardware?
No. Printago connects over your local network through the Fuse bridge, which runs on your computer or in Docker, with no Raspberry Pi, no soldering, and no extra hardware.
Other Bambu Lab printers
See the full printer compatibility list.
Sign up for free today
No credit card required. Connect unlimited printers and get production automation running in minutes.