Ratrig V-Core 4 IDEX 500 COPY MODE
The Ratrig V-Core 4 IDEX 500 COPY MODE is a 3D printer. Connect it to Printago over your local network via Moonraker to slice in the cloud, automatically route print jobs across your fleet, and monitor every print from anywhere.
Ratrig V-Core 4 IDEX 500 COPY MODE capabilities
What Printago can do with this printer once it's connected.
How to connect the Ratrig V-Core 4 IDEX 500 COPY MODE to Printago
- 1 Make sure Moonraker is running on the printer (it is on most Klipper installs).
- 2 Install the Fuse bridge on Windows, macOS, or Docker.
- 3 Add the printer in Fuse using its IP address and Moonraker port (default 7125).
- 4 Optionally provide a Moonraker API key if your install has [authorization] enabled.
Need the bridge? Download Fuse for Windows, macOS, or Docker.
Frequently asked questions
Does Printago work with the Ratrig V-Core 4 IDEX 500 COPY MODE?
Yes. Printago manages the Ratrig V-Core 4 IDEX 500 COPY MODE over your local network via Moonraker, with cloud slicing, automatic job routing, and remote monitoring.
How do I connect the Ratrig V-Core 4 IDEX 500 COPY MODE to Printago?
Make sure Moonraker is running on the printer (it is on most Klipper installs). Install the Fuse bridge on Windows, macOS, or Docker. Add the printer in Fuse using its IP address and Moonraker port (default 7125).
Can I manage multiple V-Core 4 IDEX 500 COPY MODE printers with Printago?
Yes. Printago is built for production fleets: route jobs across many V-Core 4 IDEX 500 COPY MODE units, mix them with other brands, and run the whole farm from one dashboard.
Do I need a Raspberry Pi or extra hardware?
No. Printago connects over your local network through the Fuse bridge, which runs on your computer or in Docker, with no Raspberry Pi, no soldering, and no extra hardware.
Sign up for free today
No credit card required. Connect unlimited printers and get production automation running in minutes.