Anycubic ACE Pro
Full Anycubic ACE Pro support in Printago: read every slot and run four-color prints on the LAN-mode Kobra series.
- Brand
- Anycubic
- Type
- Multi-material system
- Slots
- 4
- Supported on
- 3 printers
The Anycubic ACE Pro is the four-slot multi-color unit for the LAN-mode Kobra series (Kobra X, Kobra S1, and Kobra S1 Max), and Printago supports it in full. Connect the printer to Printago over your local network through the Fuse bridge and every ACE slot is read, with the loaded material and color shown per slot and assigned correctly so four-color prints route to the right filament. The printer keeps its always-on external spool alongside the ACE, exactly like a Bambu external spool sitting next to an AMS.
What Printago does with the ACE
-
Per-slot material assignment. Printago reads each of the four ACE slots, shows the loaded material and color, and assigns the right filament per slot so multi-color and multi-material prints come out correct.
-
External spool plus ACE. The single direct-feed spool stays available next to the four ACE slots, so you can run a job from the ACE or bypass it with the external spool, the same way a Bambu external spool coexists with its AMS.
-
Local network control. The ACE is driven over your local network through the Fuse bridge, with every slot kept in sync with the printer. No cloud account on the printer is required.
-
Filament remapping without re-slicing. Print a file from a different slot layout than it was sliced with: Printago remaps each color to the ACE slot holding the matching filament, so any supported Kobra in your farm can run the job.
Printers that support the ACE
Frequently asked questions
Does Printago support the Anycubic ACE Pro?
Yes. Printago reads each slot of the four-slot ACE Pro multi-color unit over your local network, shows the loaded material and color, and assigns materials per slot for four-color prints. The printer also keeps its single external spool, so you can print from the ACE or the direct feed.
Which printers work with the ACE in Printago?
Printago supports the ACE on Anycubic Kobra X, Anycubic Kobra S1, Anycubic Kobra S1 Max.
Can I assign materials per slot on the ACE with Printago?
Yes. Printago reads each ACE slot, shows what is loaded, and assigns the right material per slot so multi-color and multi-material prints route correctly.
Do I need a Raspberry Pi or extra hardware to use the ACE?
No. Printago connects over your local network through the Fuse bridge, which runs on your computer or in Docker, with no Raspberry Pi and no extra hardware.
Sign up for free today
No credit card required. Connect unlimited printers and get production automation running in minutes.