Anycubic Kobra 3 Max
Verified by Printago on this exact model and ready to connect.
- Toolhead
- 1
- Nozzles
- 0.4 / 0.6 / 0.8 mm
- Multi-material
- ACE · 4 slots
- Connection
- LAN (Fuse Client)
How to connect the Anycubic Kobra 3 Max to Printago
- 1 Enable LAN Mode in the printer's network settings (this switches it off the Anycubic cloud app).
- 2 Connect the printer to the same network as your Fuse bridge.
- 3 Install the Fuse bridge on Windows, macOS, or Docker.
- 4 Add the printer in Fuse — run Auto-Scan or enter the printer's IP address; the bridge completes the LAN handshake automatically.
Need the bridge? Download Fuse for Windows, macOS, or Docker.
The Anycubic Kobra 3 Max is a 3D printer. Connect it to Printago over your local network through the Fuse bridge to slice in the cloud, automatically route print jobs across your fleet, and monitor every print from anywhere.
Supported accessories for the Anycubic Kobra 3 Max
Printago drives the Kobra 3 Max's multi-material hardware, not just the printer itself.
-
Anycubic ACE Pro (4 slots). Printago reads each slot of the four-slot ACE Pro multi-color unit over your local network, shows the loaded material and color, and assigns materials per slot for four-color prints. Chain multiple ACE Pro units for even more colors, and the printer keeps its single external spool too, so you can print from the ACE or the direct feed.
Frequently asked questions
Does Printago work with the Anycubic Kobra 3 Max?
Yes. Printago manages the Anycubic Kobra 3 Max over your local network through the Fuse bridge, with cloud slicing, automatic job routing, and remote monitoring.
How do I connect the Anycubic Kobra 3 Max to Printago?
Enable LAN Mode in the printer's network settings (this switches it off the Anycubic cloud app). Connect the printer to the same network as your Fuse bridge. Install the Fuse bridge on Windows, macOS, or Docker.
Does Printago support the Anycubic ACE Pro on the Anycubic Kobra 3 Max?
Printago reads each slot of the four-slot ACE Pro multi-color unit over your local network, shows the loaded material and color, and assigns materials per slot for four-color prints. Chain multiple ACE Pro units for even more colors, and the printer keeps its single external spool too, so you can print from the ACE or the direct feed.
Can I manage multiple Kobra 3 Max printers with Printago?
Yes. Printago is built for production fleets: route jobs across many Kobra 3 Max units, mix them with other brands, and run the whole farm from one dashboard.
Do I need a Raspberry Pi or extra hardware?
No. Printago connects over your local network through the Fuse bridge, which runs on your computer or in Docker, with no Raspberry Pi, no soldering, and no extra hardware.
Other Anycubic printers
Anycubic 4Max Pro
Anycubic 4Max Pro 2
Anycubic Chiron
Anycubic i3 Mega S
Anycubic Kobra
Anycubic Kobra 2
Anycubic Kobra 2 Max
Anycubic Kobra 2 Neo
Anycubic Kobra 2 Plus
See the full printer compatibility list, or learn about print farm management software.
Sign up for free today
No credit card required. Connect unlimited printers and get production automation running in minutes.