Creality K2 Plus
The Creality K2 Plus is Creality's flagship enclosed CoreXY printer, offering the largest build volume in the K2 line at 350 × 350 × 350 mm along with the highest acceleration at 30,000 mm/s² and a max speed of 600 mm/s. It features an actively heated chamber reaching 60 °C, a 120 °C heated bed, dual AI cameras for print monitoring, and native support for the CFS multicolor system with up to 16-color printing across four connected CFS units. The 350 °C nozzle supports a wide range of engineering and composite filaments including PA-CF, PPA-CF, and ASA, targeting advanced makers and small studios needing large-format, high-speed, multi-material output.
Pros
- 350 × 350 × 350 mm build volume, the largest in the K2 line
- Actively heated 60 °C chamber enables reliable engineering-filament printing
- CFS system supports up to 16-color multicolor printing
- 30,000 mm/s² acceleration and 600 mm/s speed
Cons
- High price point for the combo configuration
- Large physical footprint may not suit all workspaces
- CFS multicolor adds complexity and purge waste versus toolchanger approaches
Creality K2 Plus capabilities
What Printago can do with this printer once it's connected.
How to connect the Creality K2 Plus to Printago
- 1 Make sure Moonraker is running on the printer (it is on most Klipper installs).
- 2 Install the Fuse bridge on Windows, macOS, or Docker.
- 3 Add the printer in Fuse using its IP address and Moonraker port (default 7125).
- 4 Optionally provide a Moonraker API key if your install has [authorization] enabled.
Need the bridge? Download Fuse for Windows, macOS, or Docker.
Frequently asked questions
Does Printago work with the Creality K2 Plus?
Yes. Printago manages the Creality K2 Plus over your local network via Moonraker, with cloud slicing, automatic job routing, and remote monitoring.
How do I connect the Creality K2 Plus to Printago?
Make sure Moonraker is running on the printer (it is on most Klipper installs). Install the Fuse bridge on Windows, macOS, or Docker. Add the printer in Fuse using its IP address and Moonraker port (default 7125).
Does Printago support the Creality K2 Plus's CFS?
Yes. Printago reads the 4-slot CFS, shows what's loaded in each slot, and assigns materials per slot so multi-material prints route correctly.
Can I manage multiple K2 Plus printers with Printago?
Yes. Printago is built for production fleets: route jobs across many K2 Plus units, mix them with other brands, and run the whole farm from one dashboard.
Do I need a Raspberry Pi or extra hardware?
No. Printago connects over your local network through the Fuse bridge, which runs on your computer or in Docker, with no Raspberry Pi, no soldering, and no extra hardware.
Other Creality printers
See the full printer compatibility list.
Sign up for free today
No credit card required. Connect unlimited printers and get production automation running in minutes.