Printago

Prusa MINI IS

LAN + Fuse
Nozzle sizes 0.25 mm0.4 mm0.6 mm0.8 mm
Printago support Tested

The Prusa MINI IS is not a distinct hardware product. Input shaping on the MINI and MINI+ was introduced as a firmware feature in the 5.1.0 release, requiring no hardware changes and no separate purchase. Printers manufactured after that point ship with input shaping pre-calibrated from the factory, and earlier units can enable it via a free firmware update. All specifications (180 × 180 × 180 mm build volume, 32-bit Buddy board, PEI spring-steel bed, filament sensor) are identical to the standard MINI+.

Pros

  • Input shaping delivered as a free firmware update to all MINI/MINI+ owners
  • Factory pre-calibrated on units shipped after the firmware 5.1.0 launch
  • No additional hardware purchase required

Cons

  • Not a separate product; it is the same printer as the MINI+ with current firmware
  • Speed gains from input shaping are constrained by the small build volume

Prusa MINI IS capabilities

What Printago can do with this printer once it's connected.

Nozzles
1 nozzle (all heated)
Bed
1 bed · sensor only
Axes
X, Y, Z
Fans
1 fan (part)
Filaments
1 feed
What Printago can control
start pause resume stop upload files

How to connect the Prusa MINI IS to Printago

  1. 1
    Enable PrusaLink on the printer.
  2. 2
    Find the PrusaLink password under Settings → Network → PrusaLink.
  3. 3
    Install the Fuse bridge, then add the printer with its host/IP and PrusaLink credentials.

Need the bridge? Download Fuse for Windows, macOS, or Docker.

Frequently asked questions

Does Printago work with the Prusa MINI IS?

Yes. Printago manages the Prusa MINI IS over your local network through PrusaLink, with cloud slicing, automatic job routing, and remote monitoring.

How do I connect the Prusa MINI IS to Printago?

Enable PrusaLink on the printer. Find the PrusaLink password under Settings → Network → PrusaLink. Install the Fuse bridge, then add the printer with its host/IP and PrusaLink credentials.

Can I manage multiple MINI IS printers with Printago?

Yes. Printago is built for production fleets: route jobs across many MINI IS units, mix them with other brands, and run the whole farm from one dashboard.

Do I need a Raspberry Pi or extra hardware?

No. Printago connects over your local network through the Fuse bridge, which runs on your computer or in Docker, with no Raspberry Pi, no soldering, and no extra hardware.

Other Prusa printers

Prusa CORE One Prusa CORE One HF Prusa CORE One L Prusa CORE One L HF Prusa MINI Prusa MK3.5 Prusa MK3S Prusa MK4 Prusa MK4S

See the full printer compatibility list.

Sign up for free today

No credit card required. Connect unlimited printers and get production automation running in minutes.

Get started