Prusa XL 5T
The Prusa XL 5-Toolhead is a CoreXY large-format printer that carries five independent Nextruder toolheads on a 360 × 360 × 360 mm build volume, enabling true multi-material and multi-color printing without filament purging or a priming tower. Because each toolhead keeps its own loaded filament path, color and material changes need only a mechanical dock-and-pick swap rather than a retraction-and-purge cycle, drastically reducing waste and change time versus MMU-style systems. The architecture also allows genuinely dissimilar materials in one print, for example PLA structural bodies with PETG supports that release cleanly. It targets professional users and studios with high multi-material output demands.
Pros
- Five independent toolheads enable true zero-waste multi-material printing
- Toolhead swaps are faster than MMU purge cycles, saving time on multi-color jobs
- Supports incompatible material pairings (for example PLA with PETG supports) for clean removal
- Modular: can start with fewer toolheads and expand
Cons
- High upfront cost with five toolheads
- Toolchanger docking mechanism adds complexity and a potential failure point
- Large footprint; enclosure sold separately for engineering filaments
Prusa XL 5T capabilities
What Printago can do with this printer once it's connected.
How to connect the Prusa XL 5T to Printago
- 1 Enable PrusaLink on the printer.
- 2 Find the PrusaLink password under Settings → Network → PrusaLink.
- 3 Install the Fuse bridge, then add the printer with its host/IP and PrusaLink credentials.
Need the bridge? Download Fuse for Windows, macOS, or Docker.
Frequently asked questions
Does Printago work with the Prusa XL 5T?
Yes. Printago manages the Prusa XL 5T over your local network through PrusaLink, with cloud slicing, automatic job routing, and remote monitoring.
How do I connect the Prusa XL 5T to Printago?
Enable PrusaLink on the printer. Find the PrusaLink password under Settings → Network → PrusaLink. Install the Fuse bridge, then add the printer with its host/IP and PrusaLink credentials.
Can I manage multiple XL 5T printers with Printago?
Yes. Printago is built for production fleets: route jobs across many XL 5T units, mix them with other brands, and run the whole farm from one dashboard.
Do I need a Raspberry Pi or extra hardware?
No. Printago connects over your local network through the Fuse bridge, which runs on your computer or in Docker, with no Raspberry Pi, no soldering, and no extra hardware.
Other Prusa printers
See the full printer compatibility list.
Sign up for free today
No credit card required. Connect unlimited printers and get production automation running in minutes.