Bambu Lab H2S
The Bambu Lab H2S is a large-format single-nozzle CoreXY desktop printer with a 340 × 320 × 340 mm build volume, roughly 120% larger than the X1 Carbon, and a 350 °C hotend paired with a 65 °C actively heated chamber. Print speeds reach 1,000 mm/s, enabled by a PMSM servo extruder, and an optional Vision Encoder delivers sub-50 µm motion accuracy. With 23 sensors and three cameras for AI-based monitoring, plus support for offline LAN operation and an optional 10 W laser and vinyl cutting module, it fills the gap between the X1 Carbon and the dual-nozzle H2D for users who need a larger print area and faster throughput but not simultaneous dual-material printing.
Pros
- 340 × 320 × 340 mm build volume, 120% larger than X1 Carbon
- 1,000 mm/s speed with PMSM servo extruder and 65 °C active heated chamber
- 23 sensors and 3 cameras for comprehensive AI print monitoring
- Optional 10 W laser and vinyl cutting module expand functionality
Cons
- Single-nozzle design; multi-material printing requires AMS and incurs purge waste
- Does not support the 40 W laser module available on the H2D and H2C
- Larger footprint than X1-series printers at a meaningfully higher price
Bambu Lab H2S capabilities
What Printago can do with this printer once it's connected.
How to connect the Bambu Lab H2S to Printago
- 1 Enable LAN Mode and Developer Mode in the printer's network settings.
- 2 Note the Access Code shown under the printer's LAN settings.
- 3 Install the Fuse bridge on Windows, macOS, or Docker, then run Auto-Scan to discover the printer.
Need the bridge? Download Fuse for Windows, macOS, or Docker.
Frequently asked questions
Does Printago work with the Bambu Lab H2S?
Yes. Printago manages the Bambu Lab H2S over your local network through the Fuse bridge, with cloud slicing, automatic job routing, and remote monitoring.
How do I connect the Bambu Lab H2S to Printago?
Enable LAN Mode and Developer Mode in the printer's network settings. Note the Access Code shown under the printer's LAN settings. Install the Fuse bridge on Windows, macOS, or Docker, then run Auto-Scan to discover the printer.
Can I manage multiple H2S printers with Printago?
Yes. Printago is built for production fleets: route jobs across many H2S units, mix them with other brands, and run the whole farm from one dashboard.
Do I need a Raspberry Pi or extra hardware?
No. Printago connects over your local network through the Fuse bridge, which runs on your computer or in Docker, with no Raspberry Pi, no soldering, and no extra hardware.
Other Bambu Lab printers
See the full printer compatibility list.
Sign up for free today
No credit card required. Connect unlimited printers and get production automation running in minutes.