Bambu Lab P1S
The Bambu Lab P1S is a fully enclosed CoreXY FDM printer sharing the same 256 × 256 × 256 mm build volume and 500 mm/s motion system as the P1P, but adding a rigid enclosure with an activated-carbon air filter, an auxiliary part-cooling fan, and a chamber regulator fan for stable temperatures. These additions make it practical for ABS and ASA in addition to PLA, PETG, and TPU. It supports optional AMS integration for up to 16-color printing and includes a built-in camera for monitoring and time-lapses, making it a strong choice for users who need engineering-grade materials alongside everyday filaments.
Pros
- Fully enclosed with carbon filter; practical for ABS and ASA
- CoreXY kinematics provide fast, consistent results at 500 mm/s
- Supports AMS for up to 16-color multi-material printing
- Complete auto-calibration; ready to print with minimal setup
Cons
- More expensive than the open-frame P1P for users who only print PLA or PETG
- No touchscreen; uses a basic monochrome display
- Enclosure retains heat, so PLA cooling requires chamber door management
Bambu Lab P1S capabilities
What Printago can do with this printer once it's connected.
How to connect the Bambu Lab P1S to Printago
- 1 Enable LAN Mode and Developer Mode in the printer's network settings.
- 2 Note the Access Code shown under the printer's LAN settings.
- 3 Install the Fuse bridge on Windows, macOS, or Docker, then run Auto-Scan to discover the printer.
- 4 Prefer the cloud? Run the Bambu Integration Flow in Printago and sign in (firmware 1.08.01 or earlier), with no local software required.
Need the bridge? Download Fuse for Windows, macOS, or Docker.
Frequently asked questions
Does Printago work with the Bambu Lab P1S?
Yes. Printago manages the Bambu Lab P1S over your local network or through Bambu's cloud, with cloud slicing, automatic job routing, and remote monitoring.
How do I connect the Bambu Lab P1S to Printago?
Enable LAN Mode and Developer Mode in the printer's network settings. Note the Access Code shown under the printer's LAN settings. Install the Fuse bridge on Windows, macOS, or Docker, then run Auto-Scan to discover the printer.
Can I manage multiple P1S printers with Printago?
Yes. Printago is built for production fleets: route jobs across many P1S units, mix them with other brands, and run the whole farm from one dashboard.
Do I need a Raspberry Pi or extra hardware?
No. Printago connects over your local network through the Fuse bridge, which runs on your computer or in Docker, with no Raspberry Pi, no soldering, and no extra hardware.
Other Bambu Lab printers
See the full printer compatibility list.
Sign up for free today
No credit card required. Connect unlimited printers and get production automation running in minutes.